Head Office & Factory: Dhaka, Bangladesh | Sales Office: Canada (02) 222-285-548 [email protected]
Fully Customizable

Custom Outdoor Jackets Exporter in Bangladesh

As a custom outdoor jackets exporter in bangladesh, Siatex Bangladesh makes outdoor shell jackets for retailers, importers and private label outdoor brands: a rust orange matte shell jacket with an attached hood and drawcord, a full front zip, two zipped hand pockets, elasticated cuffs and a drawcord hem. An outdoor jacket is a built garment, and this one is judged the way weather judges it: on whether every closure, seam and panel works together.

Materials: Matte woven shell cloth with a fine tight weave, a dry hand feel and a water-resistant finish. Every cloth lot is checked for even colour, clean surface and steady hand before cutting, because a shell shows every flaw the light touches.

Functionality: The jacket is a weather system in one garment: the hood closes with a drawcord, the front and pockets close with zips, the cuffs close with elastic and the hem closes with a cord, so wind and rain meet a fastened garment at every opening.

Size: Men's sizes S, M, L, XL and XXL, graded across the run. Chest, length, hood and sleeve measurements are checked on finished jackets from every size before packing, and your own size chart can be followed where your market measures differently.

Customisation: Your woven label inside the back neck, your colours across the range, zip and cord colours matched to your design, retail hang tags and your carton marks on the outside. Every detail is approved on the sample before bulk.

Get Price: Send your jacket style, colours, size run and packing plan through our contact page and a custom outdoor jackets exporter in bangladesh will reply with a quotation and a sample plan for your range.

Get Price
Custom outdoor jackets exporter in bangladesh rust orange hooded shell jacket front view with front zip
Made To Order

More Products We Manufacture

Custom Outdoor Jackets Exporter in Bangladesh – Shell Build, Hood and Zip Details

A shell jacket has more ways to fail than any other garment on this site. A zip that snags, a hood that will not sit, a cuff that lets the wind in: each one ends the garment’s useful life in the customer’s mind, however good the cloth is. So this jacket is built and checked as a system, not as panels.

Every closure is worked by hand on the sample and again on finished jackets from the run: the front zip runs full length without catching, the pocket zips open with cold fingers in mind, the hood cord draws evenly on both sides, and the hem cord locks where it is set.

Rust orange leads the colour story shown here, the standing shade of walking and outdoor ranges. Your own colours run across the same pattern, each approved as a finished jacket before bulk.

Matte Shell Cloth

  • Fine tight weave with a dry matte face
  • Water-resistant finish across the whole shell
  • Shade matched panel to panel across the jacket
  • Cloth face checked clean before cutting begins

Hood and Drawcord

  • Attached hood shaped to sit flat at rest
  • Drawcord drawing evenly on both sides
  • Cord ends finished so they cannot fray
  • Hood size checked on the finished jacket

Zips and Pockets

  • Full front zip running without catching
  • Two zipped hand pockets set at working height
  • Zip tapes stitched straight and read by hand
  • Pocket bags sewn in shell cloth, fully closed

Cuffs and Hem Cord

  • Elasticated cuffs that close at the wrist
  • Straight hem with a locking drawcord
  • Cuff elastic checked for recovery before use
  • Hem stitching even all the way round

Size Run and Fit

  • Men’s sizes S to XXL in one graded pattern
  • Chest and sleeve checked on finished jackets
  • Fit approved on the pre-production sample first
  • Your own size chart followed where you supply one

Outdoor Jackets for Retailers, Importers and Private Label Brands

As a custom outdoor jackets exporter in bangladesh, we build the jacket around your range plan first. Outdoor retailers take it as the core shell of a walking range, importers take it in their own label for chain distribution, and private label brands take it as the technical top of a leisure catalogue.

The three buyers judge the same jacket differently. The retailer watches how the garment reads on the rail and in the hand. The importer watches carton discipline and size ratios across a container. The brand watches whether the second season’s run matches the first. One pattern, checked three ways, serves all of them.

Every order is made to order in Bangladesh. Nothing is pulled from open stock, so the colour, the zips, the size run and the packing all follow your specification from cutting to carton.

How an Outdoor Jacket Order Runs from Cloth to Shipment

An order starts with your jacket style, colours, size run and label artwork. The factory prepares the shell cloth, checks its shade and hand, and makes a pre-production sample so you can judge the jacket whole: the hood, the zips, the cuffs, the fit and the packing.

Approving that sample is how the order is settled before any bulk cloth is cut. Your comments on hood shape, pocket height or shade are worked into the sample first, and bulk production follows the approved sample as the standing reference.

During production the jackets are checked at cutting, sewing, zip setting and finishing. Finished jackets are measured across the size run, every closure is worked by hand, and the packing is checked against your plan before cartons are sealed.

Shell, Zip and Seam Checks in Bangladesh

The shell is checked first as cloth: even shade, a clean matte face and a tight even weave with no loose threads to catch the light. Panels are matched before cutting so the jacket is one shade from hood to hem.

Zips are checked as they are set and again on the finished garment. A front zip must run its full length smoothly ten times in a row before the jacket passes, pocket zips are opened and closed against their tapes, and any zip that snags sends the jacket back.

Seams are read inside and out: panel joins straight, hood and cuff attachments clean, no raw edges anywhere. Shell garment testing frameworks and buyer standards vary by market, and testing references such as OEKO-TEX are the ones buyers commonly cite when they set their own requirements.

Product Men’s outdoor shell jacket, hooded
Cloth Matte woven shell, water-resistant finish
Hood Attached hood with drawcord
Front Full front zip
Pockets Two zipped hand pockets
Cuffs and hem Elasticated cuffs, straight hem with drawcord
Sizes Men’s S to XXL
Custom options Label, colours, zip and cord colours, hang tags, carton marks

A Hood, Cuffs and Hem Cord That Work as One System

Weather enters a jacket at its openings, so the openings are designed together. The hood draws in to the face, the cuffs close at the wrist, the hem cord closes at the hip, and the front zip closes the middle. Set on the sample, each one is checked against the others on the finished garment.

The hood is shaped to rest flat behind the collar when it is down, so the jacket reads clean on the rail, and to sit forward without pulling when it is up. That balance is set on the sample and held as the standard for the run.

Our quality assurance page sets out how these checks run through production and packing, from the first sample to the sealed carton.

Sizes, Colours and Packing from Your Outdoor Jacket Manufacturer in Bangladesh

The standard run is men’s S to XXL, graded from a measured base pattern so the hood, sleeve and body proportions stay right at every size. A shell is worn over layers, so the grading carries ease where movement needs it without letting the jacket balloon.

Rust orange is the standing colour on this page. Your programme can add further colours on the same pattern, each approved as a finished jacket before bulk, and each repeating against its own kept standard on reorders.

Packing follows your retail plan: jackets folded with hang tags in printed polybags, packed by size ratio for chain distribution, or boxed flat for your own warehouse. Ranges often pair the shell with our hoodies manufacturer in Bangladesh line so the fleece layer and the shell come from one programme.

Your Own Label Inside Outdoor Jackets from a Bangladesh Factory

Your woven label is sewn flat at the centre inside the back neck, below the hood attachment, so the jacket is yours from the moment the polybag opens. Size and care content can sit on the same label or on a second label below it, as your market requires.

Hang tags, zip pull branding where your design calls for it, and outer carton marks can all carry your artwork. The full label and packing set is approved with the pre-production sample, so nothing is improvised later in the run.

As a custom outdoor jackets exporter in bangladesh we hold your label artwork, zip specification and size content on file, so a repeat order carries exactly the same build as the first run your customers wore.

Where We Ship Your Outdoor Jacket Order

Outdoor shell jackets are a core range line in Germany, the United Kingdom, the Netherlands, Canada, the United States and Australia, where walking and outdoor retail turns over in every season. We ship to all six markets and build the packing to each buyer’s intake plan.

Germany

German outdoor retailers set the strictest construction standard in this programme: zip runs, seam reading and size truth are checked point by point on the sample, and the bulk run is verified against it before cartons are sealed.

United Kingdom

British walking and outdoor chains take the shell as a core range jacket in seasonal colour drops. Cartons are marked by size ratio to the buyer’s plan for direct warehouse intake.

Netherlands

Dutch importers run private label outdoor ranges through this programme, with hang tags and polybag print in their own artwork. The build standard is held on file so each season’s drop matches the last.

Canada

Canadian buyers order the shell for shoulder-season ranges and need the label content in two languages where their market requires it. The layout is settled at the sample stage so both wordings sit clean inside the neck.

United States

American outdoor brands run the jacket in catalogue and online ranges where measurements must match the published chart exactly. Size runs follow the buyer’s own chart where one is supplied.

Australia

Australian labels order steady repeat runs in their core colours, with hood shape and zip standard held to the first approved sample so new stock matches what their customers already wear.

Quality Checks Before Your Outdoor Jackets Leave Bangladesh

Checks run at three points: the pre-production sample against your specification, inline shell, seam and zip checks while production runs, and a final check of finished jackets before packing. Measurements, shade, closures and labels are read against the approved sample throughout.

The closure test is repeated at the final check, jacket by jacket on a sample basis from every size: front zip, pocket zips, hood cord and hem cord all worked by hand, because closures are what the wearer will judge in the first storm.

Cartons are checked against the order before the shipment leaves: counts by size and colour, pack formats and carton marks all read against your packing plan.

Why Outdoor Buyers Make Shell Jackets in Bangladesh

A shell programme rewards a factory that sews technical garments every week and keeps its zip and seam standards written down. Bangladesh gives outdoor buyers that depth of garment production at a fair cost base. Buyers building a full outdoor set often start from our custom sportswear manufacturer in Bangladesh programme and extend it into shells.

Working with a Bangladesh outdoor jacket exporter that keeps your pattern, zip specification and checks on record means every repeat is verified against the first approved sample, not rebuilt from memory.

Siatex keeps the whole build in one place, from cloth checks to the final packed carton, so questions are answered by the team that made the jackets. That single line of responsibility is what long term outdoor programmes are built on.

Care and Weather Life of a Shell Jacket

A shell jacket keeps its finish when it is washed cool, dried away from hard heat and stored uncreased. The water-resistant finish is a surface treatment, so the care content on your label tells the wearer how to keep it working, plainly and without promises the cloth cannot keep.

Because the shell standard, zip specification and shade are recorded for your programme, a repeat order matches the stock your customers already own. A walker replacing a jacket two seasons later gets the same build, which is the whole point of a kept standard.

Buyers who also run base layers and tees can source them from our t-shirt manufacturer in Bangladesh line alongside the jacket order. One factory contact across the range keeps your sourcing simple.

Frequently Asked Questions

Is the hood attached or removable on this jacket?

It is attached, shaped to rest flat behind the collar when down and to draw in with its cord when up. The hood shape and cord set are approved on the pre-production sample before bulk production begins.

Are the pockets and front closed with zips?

Yes. The front closes with a full-length zip and both hand pockets close with zips. Every zip is run by hand on the sample and again on finished jackets, and any zip that snags sends the jacket back.

Can the jacket carry our own label?

Yes. Your woven label is sewn inside the back neck, with your size and care content, and hang tags and carton marks can carry your artwork as well. The label set is approved on the pre-production sample.

What sizes and colours can we order?

The standard run is men’s S to XXL on one graded pattern, and your own size chart can be followed where your market measures differently. Rust orange is shown here, and your own colours run across the same pattern.

How do we start an order?

Send your jacket style, colours, size run and packing plan through the contact page. Approving the pre-production sample is how buyers settle a shell jacket order with a Bangladesh outdoor clothing exporter before any bulk cloth is cut.